A common use of Sway is for writing contracts or scripts that exist as part of a wider Rust application. In order to test the interaction between our Sway code and our Rust code we can add integration testing.
To add Rust integration testing to a Forc project we can use the sway-test-rs
cargo generate
template .
This template makes it easier for Sway developers to add the boilerplate required when
setting up their Rust integration testing.
Let's add a Rust integration test to the fresh project we created in the introduction .
To recap, here's what our empty project looks like:
$ cd my-fuel-project
$ tree .
├── Forc.toml
└── src
└── main.swcargo generate We're going to add a Rust integration test harness using a cargo generate
template. Let's make sure we have the cargo generate command installed!
cargo install cargo-generateNote: You can learn more about cargo generate by visiting the cargo-generate repository .
Let's generate the default test harness with the following:
cargo generate --init fuellabs/sway templates/sway-test-rs --name my-fuel-project --force --force forces your --name input to retain your desired casing for the {{project-name}}
placeholder in the template. Otherwise, cargo-generate automatically converts it to kebab-case.
With --force, this means that both my_fuel_project and my-fuel-project are valid project names,
depending on your needs.
If all goes well, the output should look as follows:
⚠️ Favorite `fuellabs/sway` not found in config, using it as a git repository: https://github.com/fuellabs/sway
🤷 Project Name : my-fuel-project
🔧 Destination: /home/user/path/to/my-fuel-project ...
🔧 Generating template ...
[1/3] Done: Cargo.toml
[2/3] Done: tests/harness.rs
[3/3] Done: tests
🔧 Moving generated files into: `/home/user/path/to/my-fuel-project`...
✨ Done! New project created /home/user/path/to/my-fuel-projectLet's have a look at the result:
$ tree .
├── Cargo.toml
├── Forc.toml
├── src
│ └── main.sw
└── tests
└── harness.rsWe have two new files!
Cargo.toml is the manifest for our new test harness and specifies the
required dependencies including fuels the Fuel Rust SDK. tests/harness.rs contains some boilerplate test code to get us started,
though doesn't call any contract methods just yet. Before running the tests, we need to build our contract so that the necessary
ABI, storage and bytecode artifacts are available. We can do so with forc build:
$ forc build
Creating a new `Forc.lock` file. (Cause: lock file did not exist)
Adding core
Adding std git+https://github.com/fuellabs/sway?tag=v0.24.5#e695606d8884a18664f6231681333a784e623bc9
Created new lock file at /home/user/path/to/my-fuel-project/Forc.lock
Compiled library "core".
Compiled library "std".
Compiled contract "my-fuel-project".
Bytecode size is 60 bytes.At this point, our project should look like the following:
$ tree
├── Cargo.toml
├── Forc.lock
├── Forc.toml
├── out
│ └── debug
│ ├── my-fuel-project-abi.json
│ ├── my-fuel-project.bin
│ └── my-fuel-project-storage_slots.json
├── src
│ └── main.sw
└── tests
└── harness.rs We now have an out directory with our required JSON files!
Note: This step may no longer be required in the future as we plan to enable the integration testing to automatically build the artifacts as necessary so that files like the ABI JSON are always up to date.
Now we're ready to build and run the default integration test.
$ cargo test
Updating crates.io index
Compiling version_check v0.9.4
Compiling proc-macro2 v1.0.46
Compiling quote v1.0.21
...
Compiling fuels v0.24.0
Compiling my-fuel-project v0.1.0 (/home/user/path/to/my-fuel-project)
Finished test [unoptimized + debuginfo] target(s) in 1m 03s
Running tests/harness.rs (target/debug/deps/integration_tests-373971ac377845f7)
running 1 test
test can_get_contract_id ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.36sNote: The first time we run
cargo test, cargo will spend some time fetching and building the dependencies for Fuel's Rust SDK. This might take a while, but only the first time!
If all went well, we should see some output that looks like the above!
Now that we've learned how to setup Rust integration testing in our project, let's try to write some of our own tests!
First, let's update our contract code with a simple counter example:
contract;
abi TestContract {
#[storage(write)]
fn initialize_counter(value: u64) -> u64;
#[storage(read, write)]
fn increment_counter(amount: u64) -> u64;
}
storage {
counter: u64 = 0,
}
impl TestContract for Contract {
#[storage(write)]
fn initialize_counter(value: u64) -> u64 {
storage.counter.write(value);
value
}
#[storage(read, write)]
fn increment_counter(amount: u64) -> u64 {
let incremented = storage.counter.read() + amount;
storage.counter.write(incremented);
incremented
}
}
To test our initialize_counter and increment_counter contract methods from
the Rust test harness, we could update our tests/harness.rs file with the
following:
use fuels::{prelude::*, types::ContractId};
// Load ABI from JSON
abigen!(TestContract, "out/debug/my-fuel-project-abi.json");
async fn get_contract_instance() -> (TestContract, ContractId) {
// Launch a local network and deploy the contract
let mut wallets = launch_custom_provider_and_get_wallets(
WalletsConfig::new(
Some(1), /* Single wallet */
Some(1), /* Single coin (UTXO) */
Some(1_000_000_000), /* Amount per coin */
),
None,
)
.await;
let wallet = wallets.pop().unwrap();
let id = Contract::load_from(
"./out/debug/my-fuel-project.bin",
LoadConfiguration::default().set_storage_configuration(
StorageConfiguration::load_from(
"./out/debug/my-fuel-project-storage_slots.json",
)
.unwrap(),
),
)
.unwrap()
.deploy(&wallet, TxParameters::default())
.await
.unwrap();
let instance = TestContract::new(id.to_string(), wallet);
(instance, id.into())
}
#[tokio::test]
async fn initialize_and_increment() {
let (contract_instance, _id) = get_contract_instance().await;
// Now you have an instance of your contract you can use to test each function
let result = contract_instance
.methods()
.initialize_counter(42)
.call()
.await
.unwrap();
assert_eq!(42, result.value);
// Call `increment_counter()` method in our deployed contract.
let result = contract_instance
.methods()
.increment_counter(10)
.call()
.await
.unwrap();
assert_eq!(52, result.value);
}Let's build our project once more and run the test:
forc build$ cargo test
Compiling my-fuel-project v0.1.0 (/home/mindtree/programming/sway/my-fuel-project)
Finished test [unoptimized + debuginfo] target(s) in 11.61s
Running tests/harness.rs (target/debug/deps/integration_tests-373971ac377845f7)
running 1 test
test initialize_and_increment ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 1.25sWhen cargo runs our test, our test uses the SDK to spin up a local in-memory Fuel network, deploy our contract to it, and call the contract methods via the ABI.
You can add as many functions decorated with #[tokio::test] as you like, and
cargo test will automatically test each of them!